Job Openings

Hot Jobs! 

If a position is not on the Hot Job list that doesn't mean there is not an opportunity.

Administrative

No Openings

Architecture

No Openings

Aviation

No Openings

Construction

No Openings

Engineering (open)

Principal Engineer  (1/12)                                                                                                                                 

New Jersey

Bachelor's degree in Electrical Engineering; P.E. with a minimum of (10) years experience in electric transmission engineering, operations or design.

• Demonstrated electric utility technical knowledge, especially system component design, operation and performance. Understanding of transmission circuit and component ratings and operating criteria, and coordination with national & regional standards.
• Demonstrated technical leadership skills. Must possess excellent verbal and written communication skills.
• Must possess and maintain a valid driver's license.
• Must foster an inclusive work environment and respects all aspects of diversity
• Must demonstrate and value differences in others' strengths, perspectives, approaches, and personal choices

Project Lead Engineer-Substations  (12/11)                                                                                                   

North Carolina

Bachelor of Science in Electrical or Mechanical Engineering required; P.E. with minimum (5) years of technical and commercial high voltage systems substations experience. Basic knowledge of applicable ANSI standards is required. Knowledge of Microsoft Office, Lotus Notes, AutoCAD & MicroStation is a plus. This position requires the ability to clearly communicate with Customer personnel in order to success-fully collaborate, coordinate, and resolve project related activities and issues. Problems involve recognizing situations and applying appropriate concepts to solve problems that are usually short-term in nature. Good conversation skills and normal tact and courtesy are required. Travel is required; up to 30% both domestic and international.

Purpose of this position is to plan and lead the engineering of AIS and GIS substation projects. Responsible for the coordination and execution of all engineering disciplines for medium-voltage and high-voltage substation projects, both Air Insulated Switchgear (AIS) and Gas Insulated Switchgear (GIS) substation projects, in the 34.5 - 550 kV range (future possibility up to 800kV) with an emphasis on project safety, cost, quality and reliability.

• Manage and lead all engineering activities during the proposal, design and construction stages of substation projects with strict adherence to the project contract.  
• Notify the Director of Engineering and the Project Manager of any difficulties encountered in the engineering and design that may adversely impact safety, reliability, quality, cost, or schedule of the project deliverables, and provide recommendations for solutions.  
• Prepare, update and support the project execution engineering activities in the schedule with emphasis on; On-time delivery, Quality of deliverables and Project costs.  
• Develop the Design Criteria and the Document Deliverables list for the project.  
• Lead the development of single-line diagrams, layout drawings, raceway systems, grounding systems, station service and BOMs for substation design packages.  
• Utilize knowledge of the National Electrical Safety Code to ensure that designs comply with the required safety clearances.  
• Perform technical, cost savings, and constructability reviews of design packages from internal engineering, outsource sub-contractor engineering and equipment factories.  
• Generate equipment specifications, monitor vendor technical compliance and witness factory acceptance testing.
• Experience with outdoor and indoor substation applications. Specifically on indoor applications, a good understanding of the necessary building infrastructure to support GIS is preferred (e.g. wall penetrations, embedded steel supports, overhead cranes, maintenance access, SF6 reclaimers, etc.).  
• Experience in HV power cable system design, including ampacity calculations, cable pulling design, cable vault layouts, cable restraint design, and GIS sealing end/air termination applications, is a bonus.  
• Solid knowledge of the benefits and strengths of GIS vs. AIS substations as they relate to reliability, space savings, safety, maintenance, security, aesthetics, life-cycle costs, etc.  
• Provide substation project management support, including managing engineering scope according to technical contracts, equipment procurement, developing change orders, and maintaining project schedules.  
• Adhere to Substations quality processes and document control procedures to ensure design documents are complete and accurate.  
• Provide construction, installation & commissioning support Principal Clients/Customers: Utilities, Cooperatives, Municipalities, Industries, and Developers

Project Manager-Substations  (12/11)                                                                                                                 

Colorado

10+ yrs. exp. with a Bachelors in Construction Management, Engineering or related field as a Project Manager for Substation construction, electric energy distribution and/or sub transmission, ability to prepare construction schedules in Microsoft Project and/or Primavera, knowledge and/or ability to learn and understand the estimating process regarding labor hours and equipment. Ability to be mobile to various locations and available to travel to project areas as project needs are required  

•   Preparation of project construction schedules
•   Submission of Request for Information to clients
•   Acting as main point of contact for projects and facilitating conference calls
•   Coordinating meetings, scheduling updates, submitting deliverables and addressing outstanding 'open items'     as requested by clients
•   Preparation of look-ahead documents and weekly/monthly progress reports
•   Reviewing and monitoring job costs versus budgets
•   Reporting to management team and other duties as assigned
•   Keeping emphasis on the client, develop an understanding of the client's culture, key people and processes
•   Provide guidance and direction for estimators during the estimation process

Project Manager-Transmission  (12/11)                                                                                                            

Texas 

10+ yrs. exp. with a Bachelors in Construction Management, Engineering or related field while, being a Project Manager for Transmission and or Substation construction, prior experience working in electric energy distribution and/or sub transmission, ability to prepare construction schedules in Microsoft Project and/or Primavera, knowledge and/or ability to learn and understand the estimating process regarding labor hours and equipment  

•  Preparation of project construction schedules
•  Submission of Request for Information to clients
•  Acting as main point of contact for projects and facilitating conference calls
•  Coordinating meetings, scheduling updates, submitting deliverables and addressing outstanding 'open items'    as requested by clients
•   Preparation of look-ahead documents and weekly/monthly progress reports
•   Reviewing and monitoring job costs versus budgets
•   Reporting to management team other duties as assigned
•   Keeping emphasis on the client, develop an understanding of the client's culture, key people and processes  
•   Provide guidance and direction for estimators during the estimation process

Environmental

No Openings

Geotechnical

Senior Geotechnical Engineer  (11/11)                                                                                                            

New Jersey

P.E. with 6 -10 yrs. of exp. in either NJ or NY, a Master's in either Geotechnical or Civil Engineering with a Geotechnical emphasis, experience, including strong transportation project experience, preferably for NJDOT, NJ Turnpike and Garden State Parkway, buildings and pavement. Must have excellent verbal and written communication skills. The successful candidate will be expected to deal with multiple offices and clients on several projects simultaneously, with minimal supervision and will also be responsible for project budgets, training junior engineers and meeting project schedules.

Information Technology

Systems Engineer  "System Integration" (2/12)

Northern Virginia

Must have 7+ years of experience and a Polygraph clearance, be able to provide architectural and systems engineering support to the AB for the AOs for GCS infrastructure, which, includes, but is not limited to:

•  Analysis / allocation
•  Functional analysis / decomposition
•  Architecture design / syntheses
•  Risk analysis

Provide complete analysis of the architecture objectives through the use of:  

•  Technical research
•  Trade studies and comparisons
•  White papers
•  Models
•  Demonstrations and Graphical tools

Ensure that the systems designed by ATC are compliant with the Agency's Enterprise Technical Architecture (ETA) and that future versions of the ETA include considerations for the new technologies being evaluated and provide architecture and engineering support in the process of:

•   Development of Investment Business Cases
•   Deciding whether the AO will meet user needs in its intended environment
•   Prioritization and scoring of potential projects against Architecture and Technology criteria
•   Ad hoc engineering/architecture clarifications as requested by senior decision-makers or lower level

           engineering functions.

Database Administrator Advisor  (1/12)

Northern Virginia / Maryland

Bachelor of Science in Information Technology, Computer Sciences or a related field; 7 + years industry experience in Information Systems and 7 + years experience in Database Administration or related disciplines; or any combination of education and experience, which would provide an equivalent background. Will be responsible for maintaining, optimizing, programming and troubleshooting all database issues. Database administration responsibilities include database backups, database restores, database security setup, replication, SQL configuration, SQL replication, planning and growth of existing/new databases as well as creation and maintenance of appropriate database support and operations programming documentation.

•  Experience in the recent five consecutive years with SQL Server Database Administration (including at least

           1 year in SQL Server 2005 or SQL Server 2008)

•  Experience with installing and configuring SQL Server on Microsoft Windows Server Experience in

            maintaining SQL Server databases in a transactional environment

•  Experience with SQL Server replication
•  Experience with performance troubleshooting with SQL queries Knowledge of DBA best practices
•  Experience troubleshooting database security issues
•  Effective oral, written communication, organizational, and interpersonal skills
•  Creative thinking and organizational skills Interest in professional growth, learning and skill set development  

Development Lead - Controls Systems Engineering  (1/12)

Iowa

Bachelors in Mechanical Engineering, Electrical Engineering, Computer Engineering, Computer Science or other engineering degree with controls development experience with 5+ years experience in product engineering, 3+ years of experience in developing and implementing control systems designs in a production system/product and 2+ years in technically leading a design team and / or complex embedded projects.

•  Experience with embedded software, systems, or systems test engineering experience.  
•  Experience with controls engineering development process such as Model Based Software Development (MBSD) and rapid prototyping.

Technical experience related to dynamic machine control and / or any of the following:

•  Experience with MatLab simulation and modeling
•  Experience with Agile software development practice and techniques.
•  Experience with embedded simulation, automation and continuous integration.
•  Experience with agriculture or construction vehicles or similar industry.
•  Experience with complex electrical systems, ISO11783-based CAN networks, GPS based guidance systems.

Power Electronics Test Design  (1/12)

North Dakota

BS in Electrical or Computer Engineering or 5+ years of functional electronics manufacturing test experience, thrives on solving problems, will design new and enhance existing manufacturing functional test systems for robust electronics intended for on/off road vehicles and harsh environments.

• Perform requirements capture, analysis, design, programming, debugging, hardware integration and verification.  
• Focus on power electronics and testing of high power devices in a manufacturing environment.  
• Provide technical guidance to other test team members and lead large test projects requiring more than one         engineer.  
• Experience testing 2-450KW motor controllers, power converters or inverters, dealing with high voltage testing       and development environment, Labview.  

Candidate will also have experience with Switch Reluctance, Permanent Magnet and 3-phase traction drive motors, experience with communication protocols (i.e. CAN, FlexRay, Ethernet, USB, etc.) and experience with CMMI, ISO or other mature development models.  

Electronic Design Engineer  (1/12)

North Dakota

Bachelor's of Science in Electrical Engineering with 3+ years of commercial design experience related to electronic equipment and electronic hardware systems. The person will work in a team environment to design, modify and evaluate electronic products for use in rugged environments to meet quality, delivery and cost goals.

• Have responsibility for the full development cycle for products, taking them from concept through production.
• Design new embedded microcontroller and application processor based products that meet customer, reliability and quality requirements with the involvement of manufacturing/mechanical/software engineers and supply management.
• Perform worst case analog/digital/mixed signal design analysis, simulations, and design verification to ensure electronic assemblies meet the requirements of harsh environments for the vehicle applications.
• Conduct experimental tests and evaluate results, including electromagnetic compliance (EMC),                       electromagnetic immunity (EMI), highly accelerated life test (HALT) as well as various electrical & 

         environmental tests.

•  Provide technical support to marketing, manufacturing, quality and supply management organizations.

Systems Engineer  (1/12)

Illinois

BS in Engineering (electrical or mechanical) with a minimum of 10 years of System engineering Aircraft Electric Power System design (generation, distribution, communications, and BITE) with experience in requirements generation, validation, management, simulation development, system verification planning, and system testing. Experience with EPS tools and processes preferred and DC system and battery expertise, utility and load management, motor control (induction and PM)(sensorless and sensed), certification and system architecture (familiarity with regulating authorities and associated documentation as well as safety aspects.

• Lead the System Controls development Interface with Customer, Project, Chief Engineer, and Program office   Requirements decomposition and flowdown  
• Generating System Requirement Documents  
• Generating LRU Requirements Documents  
• Creating controller models using MATLAB/Simulink  
• Integrate MATLAB/Simulink control and plant models  
• Electric system load analysis  
• Perform High Level requirement validation and testing on desktop simulations  
• Establish verification methodology  
• Coordinate Test Facility Requirements  
• Perform system integration and subsystem level testing in Development Test facilities  
• Support aircraft and customer lab testing  
• Execute system engineering Standard Work (SW)

Previous experience with control requirements, system testing, DOORS, and Matlab/Simulink is required. The ability to effectively lead and communicate (verbal and written) programmatically and technically to the team is a critical attribute.

Systems Engineer  (1/12)                                                                                                                                  

Northern Virginia

Landscape Architecture

No Openings

Land Development

CADD Technician  (2/12)

Maryland

Must have 2 - 3 experience in Civil Design working with Auto Cadd, Microstation and be able to support team in preparation of plans and drawings. The major objectives are the quality (accuracy, thoroughness, clarity) of work, meeting schedules, within budgets and responsive service. This person will be tasked with the production of plans and drawings to cover all details so that the quality is present and budgets and schedules are met. This job requires downloading and uploading field data, technical production of plans and drawings.

Management

Chief Executive Officer  (12/11)                                                                                                                     

Texas

• Achieve budgeted financial objectives Focus on census building efforts and strategic planning.
• Recruit physicians in targeted specialty areas, coordinate medical staff participation in new hospital ventures and targets and develop new areas of medical care to offer at the hospital.
• Develop positive relationships with local industry, local government, potential key health care providers, and the general public. Interact and communicate with Corporate Office and Regional Vice Presidents.
• Ensure the timely submission of month-end financial and operational reviews, contribute to the development of and participation in corporate-wide strategic planning efforts and maintains good communication with the corporate office in areas where periodic reporting of results is requested.
• Ensure that hospital employees respond promptly to corporate requests for information.
• Communicate circumstances and events of operations to supervisor and other appropriate people to keep all apprised.

Mechanical / Electrical / Plumbing

Senior Plumbing Engineer   (Filled)

New York

•  Bachelor's in engineering with a sound knowledge of engineering fundamentals.

•  8 to 10 years experience related to plumbing and fire protection systems design.

•  PE license and LEED certification is preferred, but not required.

•  AutoCAD proficient.

•  Project and supervisor management, good communication skills essential for team-based working.

•  Excellent planning and organization skills required for our fast-paced environment.

•   Must be highly motivated, proactive and willing to take on new challenges.

Duties will include design of a wide range of projects including laboratories, commercial, institutional and education buildings and transportation facilities. Candidate shall have experience in designing plumbing systems including; domestic cold water, water treatment, domestic hot water, sanitary drainage and vent , storm drainage, pumping, natural gas distribution, medical and laboratory gas, and other special plumbing systems. Candidate shall also be capable of designing fire protection systems including; wet pipe and dry pipe sprinkler, FM 200, kitchen hood fire suppression system, etc. Other responsibilities include preparation of CAD drawings, system design calculations, equipment selections, design reports, and design narratives. Candidate will also be required to coordinate work with the client and engineers of other disciplines, attend meetings, prepare meeting minutes, and communicate with clients to establish their needs and discuss design issues. Experience in incorporating sustainable (LEED) design methods in buildings a plus.

Municipal

No Openings

Structural

Structures Engineer  (12/11)                                                                                                                          

Connecticut

10+ years of structural analysis and analyzing gas turbine engine hardware with a Bachelor Degree in Mechanical, Civil, Structural or Aerospace Engineering. Strong communication, interpersonal, time management, and organizational skills and demonstrated problem-solving experience in multi-functional team environment. Must contribute to the overall design, analysis, testing, fabrication, and validation of new designs. Structures engineers analyze and propose designs and features that meet the requirements for the compression system, and then evaluate the designs against success criteria through bench, rig and full engine testing. Applicants are required to be knowledgeable in finite element analysis and current state of the art FEA software, possess a solid understanding of the basic principles of structural mechanics, and must have the ability to coach and direct less experienced engineers. Individuals are needed who can step in immediately to make a positive impact or even lead teams, in a focused fashion, to achieve challenging program goals.

Position may require candidates hold or be capable of holding US government security clearances.

Transportation

Highway / Roadway Practice Builder  (12/11)                                                                                                4

California

P.E. with 10+ years of experience in California Department of Transportation (Caltrans) design standards for Highways / Roadways. 

•  Demonstrated ability to effectively interact with clients.

•  Completed final design for at least 3 or more - Plans, Specifications and Estimate (PS&E) packages for highway / roadway interchange projects.

•  Provided leadership for a group of engineers.

•  Proven ability to manage budgets while meeting a schedule.

•  Demonstrated ability to develop proposals and win work.

•  Track record of winning these type of jobs and delivering these type of job 

Water / Wastewater

No Openings                                                                                                                     

Water Resources 

Project Manager  (1/12)

Maryland

B.S. in Civil, Environmental, Water Resources, or Biological Resources Engineering: P.E. with (6) years experience in related field with at least two (2) years as a Project Manager.

• Excellent communication and written skills
• Minimum of eight (8) years of engineering experience including stormwater management analysis and design, hydrologic and hydraulic modeling and analyses, and geographic information systems (GIS)  

Preferred skills :

• Experience with proposal writing Experience with managing multiple projects and/or task orders simultaneously
• Experience in directing staff to perform aspects of carrying out the project
• Experience in managing and developing project budgets and billing projects
• Experience with ePMP or a similar application  

Job Responsibilities: Serve as the lead in a variety of water resources projects including those related to FEMA, stormwater, stream restoration, water quality, water and wastewater, and watershed management. This person will mentor entry level engineers, coordinate with engineering and GIS staff, perform engineering analyses and design, develop reports and presentations, meet financial performance goals on assigned projects, assist with market development, and handle client relations.

Utility

No Openings